Pulse Distributors and Signal Amplifiers for Incremental Encoders

The innovative motrona pulse splitters and signal distributors distribute the output signals of incremental encoders and measuring systems easy and clean to several terminals and simultaneously amplify the signals. They can also be used for level conversion. Depending on the requirements, different variants are available without, with simple or with complete potential separation.
 

Impulse distributor for incremental encoders without potential separation between input and output.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422 / HTL differential]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 4 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Signal Distributor for Incremental Encoder without Potential Separation, 4 Outputs

Impulse distributor for incremental encoders without potential separation between input and output. 
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Impulse Distributor for Incremental Encoder without Potential Separation, 8 Outputs

Impulse distributor for incremental encoders without potential separation between input and output. Outputs can be expanded with the EV224 and EV228 expansion modules.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Expandable pulse distributor for incremental encoders, 8 outputs

Expansion module for the impulse distributors GV228/EV without potential separation. For expanding by four more outputs
 

  • 4 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
  • BUS interface for quick and easy connection of the modules
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
Expansion module for GV series without potential separation, 4 Outputs

Expansion module for the impulse distributor GV228/EV without potential separation. For expanding by eight more outputs
 

  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
  • BUS interface for quick and easy connection of the modules
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
Expansion module for GV series without potential separation, 8 Outputs

Impulse distributor for incremental encoders with potential separation between input and output.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 2 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Impulse Distributor for Incremental Encoder with Potential Separation, 2 Outputs

Impulse distributor for incremental encoders with potential separation between input and output.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422 / HTL differential]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 4 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Impulse Distributor for Incremental Encoder with Potential Separation, 4 Outputs

Impulse distributor for incremental encoders with potential separation between input and output.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Impulse Distributor for Incremental Encoder with Potential Separation, 8 Outputs

Impulse distributor for incremental encoders with potential separation between input and output. Outputs can be expanded with the ET224 and ET228 expansion modules.
 

  • 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
Expandable pulse distributor for incremental encoders with Potential Separation, 8 outputs

Expansion module for the impulse distributors of the GT series with potential separation. For expanding by four more outputs
 

  • 4 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
  • BUS interface for quick and easy connection of the modules
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
Expansion module for GV series with potential separation, 4 Outputs

Expansion module for the impulse distributors of the GT series with potential separation. For expanding by eight more outputs
 

  • 8 push-pull outputs, formats corresponds to the input signals, but with individual assignment for each output
  • BUS interface for quick and easy connection of the modules
  • Input frequency up to 500 kHz [HTL] or 1 MHz [RS422 / TTL]
Expansion module for GV series with potential separation, 8 Outputs

Puls distributor with level converter and switching.

 

  • 2 pulse inputs with format A, B, Z [HTL] or
    A, /A, B, /B, Z, /Z [TTL / RS422]
  • Input frequency up to 250 kHz for asymmetrical and up to 1 MHz for symmetric signals 
  • 2 output channels with format A, B, Z [HTL] oder
    A, /A, B, /B, Z, /Z [TTL / RS422], each output adjustable separately
Pulse Switch, Distributor and Splitter for Incremental Encoder Signals

Single pulse distributor for incremental encoder signals.

 

  • 1 pulse input with format A, /A, B, /B, Z, /Z
  • Input frequency 750 kHz [TTL / RS422] or 300 kHz [HTL]
  • 2 pulse outputs with format A, /A, B, /B, Z, /Z
    with individual adjustable output levels [HTL, RS422]
Pulse Splitter for Incremental Encoder Signals

Encoder switch with 20 encoder inputs, 2 encoder outputs and 2 x 6 control inputs. Depending on the configuration of the control inputs, the device switches the signal at the input (1 - 20) to the respective output (OUT1 - 2).

 

  • Pulse input with format A, /A, B, /B, Z, /Z [RS422]
  • Input frequency up to 1 MHz
  • 2 encoder outputs for TTL / RS422
Encoder-Switch

Signal distributors and pulse splitters for sine-cosine encoders or measuring systems. With 2 SinCos outputs and 2 incremental outputs (HTL, TTL / RS422).

 

  • 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
  • Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
  • 2 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
  • 2 pulse outputs with format A, /A, B, /B, Z, /Z [RS422, TTL, HTL]
SinCos Encoder Distributor