Firmware for MC700 Motion Controller

  1. Make sure you have installed the motrona OS 5.1 software on your PC
  2. Use the right mouse key to save the desired firmware to your PC
  3. Download the firmware from PC to MC700 by following the instructions given in the manual
  4. Set your specific parameters and run the Adjust Menu
  5. You will be able to run all adjusting and testing functions without a license key
  6. Get your license key from motrona and enter it to the unit to run production mode

 

 

Synchronization of two belts for MC700

Synchronization of Drives for MC700

With the use of BY701 firmware, the MC700 controller provides excellent solutions with all kinds of multi-axes synchronizing applications. Numerous possibilities for control of relative phase, position, index and print mark evaluation are available.

By701.zip (185 KB)

By701_d.pdf (977 KB)

By701_e.pdf (951 KB)

(available with login)


Eccentric Material Processing

Eccentric Material Processing

The Firmware CT701, in combination with the controller MC700 offers a maximum processing performance with guillotines or eccentric shears in cut-to-length-lines.

Ct701.zip (170 KB)

Ct701_d.pdf (747 KB)

Ct701_e.pdf (747 KB)

(available with login)


Extended Eccentric Material Processing for MC700

Extended Eccentric Material Processing for MC700

Heavy-duty version with enhanced features for cutting of thick or hard sheet steel (e.g. high-grade stainless steel).

Further information on demand.

Ct701e.zip (172 KB)

(available with login)


Rotating Cross Cutters for MC700

Rotating Cross Cutters for MC700

Rotary cutters and other rotary applications require high dynamics, precise cuts and short position control cycles. These requirements will be complied by using the CT703 firmware and the MC700 motion controller.

Typical applications are intermittent or rotary operations like cutting, perforating, printing, sealing, adhesion, applying, labeling and many more.

Ct703.zip (166 KB)

Ct703_d.pdf (1 MB)

Ct703_e.pdf (1 MB)

(available with login)


Flying Saws, Shears, Punchers etc. for MC700

Flying Saws, Shears, Punchers etc. for MC700

With the use of FS701 firmware, the MC700 controller provides excellent solutions with all kinds of flying cut-to-length systems as well as with applications like labeling, printing punching, sealing, etc.

Fs701.zip (165 KB)

Fs701_d.pdf (1 MB)

Fs701_e.pdf (1 MB)

(available with login)


Tubular Bag Packing Machine for MC700

Tubular Bag Packing Machine for MC700

Due to highly dynamic motion profiles, the combination of firmware TB701 and MC700 controller works very precisely and is optimized for tubular bag packaging machines (e. g. "pillow packaging").

Tb701.zip (192 KB)

Tb701_d.pdf (1 MB)

Tb701_e.pdf (1 MB)

(available with login)


Winding and Tension Controller

Winding and Tension Controller

Firmware and license code on demand.

Wr701_d.pdf (1 MB)

Wr701_e.pdf (1 MB)

(available with login)


Traverse Controller

Traverse Controller

Firmware and license code on demand.

Wr701_d.pdf (1 MB)

Wr701_e.pdf (1 MB)

(available with login)


Customer Login

Login
» Please register

You still have questions, you would like to get mor information about our service and products?

Your contact person is at your disposal for any question and further information.