Synchronization
Products found: 4All synchronization controllers shown on this site operate according to the Master- Slave principle. Where the Master can freely move with any motion profile under control of any remote speed reference, the synchronizer will control one or several Slaves to exactly follow the Master motion in terms of position and speed.
The control is based on incremental position feedback by means of encoders on both sides. Many applications just use a measuring wheel with encoder instead of a Master drive. It is possible to preset every speed or gear ratio by means of adjustable impulse scaling factors.
All units can accept marker pulses from the encoders and from remote proximity switches or photocells, to automatically produce the correct position with pitch or cycle related applications. motrona synchronous controllers can operate with any kind of speed variable drives (AC inverter, DC, Servo or hydraulic type) that follow to a ±10 V speed reference signal. The extremely fast position control loop provides excellent performance even with highly dynamic applications.
- 2 pulse inputs with format A, B, 90° [HTL]
or A, /A, B, /B [RS422] - 4 control inputs for HTL / PNP / NPN / Namur signals
[10 ... 30 VDC] - Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof
[5 … 30 VDC] - 1 scalable 14 bit analog output
(±10 V or 0/4 … 20 mA) - Loop time approx. 250 µs
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM300 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS conncetion via motrona gateway PB251
- 2 pulse inputs with format A, B, 90° [HTL]
or A, /A, B, /B [RS422] - 4 control inputs for HTL / PNP / NPN / Namur signals
[10 ... 30 VDC] - Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof
[5 … 30 VDC] - 4 potential-free changeover relay outputs
- 1 scalable 14 bit analog output
(±10 V or 0/4 … 20 mA) - Loop time approx. 250 µs
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM600 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS conncetion via motrona gateway PB251
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12 bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12 bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top hat rail
(according to EN 60715) - Setup via windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
- 4 pulse inputs in A, /A, B, /B format [RS422]
- 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short position control cycles (depending on application)
- Power supply 18 ... 35 VDC
- Compact housing for mounting on 35 mm top-hat rail
(according to EN 60715) - Can be parameterized using freely available Windows operating software
- Optional interfaces: CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET and SERCOS-II