MC800: Multi-axis motion controller

The MC800 is a drive controller for up to 2 axes with an integrated tandem drive controller.

Application firmware offers a wide range of possible applications, including synchronization control, index and print mark control as well as control of rotary cross cutters and flying saws.

Thanks to optional interface modules, seamless integration into various networks such as CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET and SERCOS-III is possible.

The axis dependencies can be freely assigned, which enables maximum flexibility in the control system.

The control cascade extension supports control in the torque loop, with tandem control ensuring precise synchronization of two drives.

Please enquire without obligation - our engineers will be happy to advise you.

4 pulse inputs in A, /A, B, /B format [RS422]
2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
8 control inputs for PNP signals [10 ... 30 VDC]
2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
Short position control cycles (depending on application)
Power supply 18 ... 35 VDC
Compact housing for mounting on 35 mm top-hat rail
(according to EN 60715)
Can be parameterized using freely available Windows operating software
Optional interfaces: CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET and SERCOS-II

» Add to cart

CAN-Bus (MC800)

EDS Files for CANopen© units MC800.

Ci800.zip (9 KB)

(available with login)

PROFIBUS (MC800)

PROFIBUS© GSD File for motrona MC800 units.

HMSB1811.zip (2 KB)

(available with login)

PROFINET (MC800)

PROFINET GSD File for motrona MC800.

GSDML.zip (28 KB)

(available with login)

Synchronization of Drives for MC800

Rotating Cross Cutters for MC800

Rotary cutters and other rotary applications require high dynamic, precise cuts and short position loop time. These requirements will be complied by using the CT803 firmware and the MC800 motion controller.

Typical applications are intermittent or rotary operations like cutting, perforating, printing, sealing, adhesion, labeling and many more.

Compared to the CT703 firmware, the CT803 firmware with MC800 hardware has an additional axis for a feed roller with optional dancer control. Furthermore a significantly higher dynamics is achieved. In addition, an adaptation to a variety of sensor systems and fieldbus architectures is possible.

Special highlight of this firmware is the integrated tandem drive controller which enables achieving the acceleration requirement of a slave axis by distributing the power on two independent drives.

License code on demand.

(available with login)

Flying Material Processing for MC800

By using this application firmware, the MC800 controller is equipped for motion control tasks with typical “on-the-fly-processing” machines (e. g. sawing, cutting, punching, drilling, etc.).

The FS801 has an additional axis. This allows for example the controlling of the saw carriage and additionally the saw blade at the same time.

Compared to the FS701 firmware, a significantly higher dynamic is achieved by using the combination FS801 firmware with MC800. In addition, processing to various sensor systems and fieldbus architectures is possible.

License code on demand.

(available with login)