Rotations Querschneider
Products found: 4
Controller for Rotary Cutters
- 2 pulse inputs with format A, B, 90° [HTL]
or A, /A, B, /B [RS422] - 4 control inputs for HTL / PNP / NPN / Namur signals
[10 ... 30 VDC] - Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof
[5 … 30 VDC] - 1 scalable 14 bit analog output
(±10 V or 0/4 … 20 mA) - Loop time approx. 250 µs
- Cutting length specification via keyboard
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM300 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS conncetion via motrona gateway PB251
Controller with 4 Relays and front-mounted Thumbwheel Switches
- 2 pulse inputs with format A, B, 90° [HTL]
or A, /A, B, /B [RS422] - 4 control inputs for HTL / PNP / NPN / Namur signals
[10 ... 30 VDC] - Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof
[5 … 30 VDC] - 4 potential-free changeover relay outputs
- 1 scalable 14 bit analog output
(±10 V or 0/4 … 20 mA) - Loop time approx. 250 µs
- Cutting length specification via BCD decade switch on the front
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM600 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS conncetion via motrona gateway PB251
Universal Motion Controller
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12 bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12 bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top hat rail
(according to EN 60715) - Setup via windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
Multi-axis motion controller
- 4 pulse inputs in A, /A, B, /B format [RS422]
- 2 scalable 14-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 2 scalable 14-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short position control cycles (depending on application)
- Power supply 18 ... 35 VDC
- Compact housing for mounting on 35 mm top-hat rail
(according to EN 60715) - Can be parameterized using freely available Windows operating software
- Optional interfaces: CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET and SERCOS-II
