Speed Monitor
Products found: 7The speed monitors of the DZ series are designed for the installation in control cabinets. They are used to monitor overspeed, underspeed, direction of rotation or standstill of machines. Special models of the speed monitors, which have an analog output, can also be used for control tasks.
The special features of our speed monitors are the very high frequency range, the fast response and the easy adjustability of the speed, direction and standstill parameters depending on the used input signals.
- High level of external safety (Recognition of electrical or
mechanical errors in the machinery / sensor systems / wirings etc.) - High level of internal safety (detection of internal errors
and failures of the device components) - 2 Pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- 6 logical inputs for PNP signals [10 ... 30 VDC]
- Input frequency up to 500 kHz
- 4 fast transistor outputs with push-pull characteristic,
short-circuit-proof [5 ... 30 VDC] - 4 forced-guided redundant output relays with
potential free change-over contact - Serial interface RS232 and RS485
- Power supply 24 VAC and 17 ... 40 VDC
- Compact norm panel housing
- 6 digits LED display with 15 mm height
- Display range -199999 ... 999999
- Setup by keys or PC via serial RS232 Interface
- Dimension B x H x T = 110 x 48 x 140 mm (4,33 x 1,89 x 5,51")
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422],also possible for single channel
- Input frequency up to 1 MHz
- 14 bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
- Pulse input with format A, B, 90° [HTL] or
A, /A, B, /B [RS422], also possible for single channel - Input frequency up to 1 MHz
- 3 output relays
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail
(according to EN 60715) - LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
- Pulse input with format A, B, 90° [HTL] or
A, /A, B, /B [RS422],also possible for single channel - Input frequency up to 1 MHz
- 3 fast transistor outputs [PNP]
- 14 Bit analogue output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail
(according to EN 60715) - LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422],
also possible for single channel - Input frequency up to 1 MHz
- 3 output relays
- 14 Bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422],
also possible for single channel - Input frequency up to 500 kHz
- 2 output relays with potential-free change-over contact
(forward, reward and zero motion) - 2 transistor outputs with High-Side-Driver, short-circuit-proof
- Power supply 17 ... 30 VDC
- Snap-on housing for top hat rail (according to EN 60715)
- DIL switch for setup of input characteristic and definition of standstill
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422],also possible for single channel
- Input frequency up to 1 MHz
- 3 fast transistor switching outputs [PNP]
- 14 bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface