Product filter

Frequenz (HTL, TTL)

Products found: 19

Die hier gezeigten Geräte dienen zur Konvertierung von Frequenzen in analoge Normsignale (V oder mA) oder parallele Signale (Binär-, Graycode- oder BCD-Format) und stellen die umgewandelten Werte zudem über eine serielle Ausgangsschnittstelle dar. Die zur Montage in einen Schaltschrank vorgesehenen Messumformer stehen für eine hohe Zuverlässigkeit, einfache Bedienung, präzise Konvertierung und hohe Frequenzbereiche. Zahlreiche programmierbare Zusatzfunktionen runden den jeweiligen Funktionsumfang sinnvoll ab. Eine Schnappvorrichtung an der Gehäuse-Unterseite erlaubt die sekundenschnelle Montage auf eine Hutschiene nach EN 60715.

Weitere Möglichkeiten zur Umwandlung von Frequenzen in Analogsignale und/oder serielle Formate bestehen auch mit unseren Anzeigegeräten der Serie DX (siehe Tachometer).

LW213

Fiber Optic (Send-)Module for RS422 / HTL Signals (3000 m)

4 independent input channels with format A, B, C, D [HTL] or
A, /A, B, /B, C, /C, D, /D [RS422],
also possible for single channel
4 output channels with format A, B, C, D [HTL] or
A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 1300 nm
Transmission distance up to 3000 meters
Power supply 5 VDC (for LW213)
Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
Snap-on housing for top hat rail
(according to EN 60715)
Pre-configured optical fibers available
Option HT (= High Temperature) -40°C ... +75°C

LW215

Optical Fiber (Send-) Module for RS422 / HTL Signals (up to 2000 m)

4 independent input channels with format A, B, C, D [HTL] or
A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
4 output channels with format A, B, C, D [HTL] or
A, /A, B, /B, C, /C, D, /D [RS422]
Maximum input frequency 1 MHz
Very short conversion time < 300 ns
Optical wavelength 850 nm
Transmission distance up to 2000 meter
Power supply 5 VDC (for LW215)
Power supply 10 ... 30 VDC (for LW215-1, LW215-2, LW216-3)
Snap-on housing for top hat rail
(according to EN 60715)
Pre-configured optical fibers available

Option HT (= High Temperature) -40°C ... +75°C

FU210

Signal Converter Frequency >>> Analog / Serial RS232/RS485

Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
Power supply 18 ... 30 VDC
Snap-on housing for top hat rail (according to EN 60715)
Setup via operator software OS6.0
Serial RS232- / RS485 interface
SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
Start-stop interface for absolute transducers and magnetostrictive sensors
USB interface and RS232/RS485-interface for configuration and serial readout

FP210

Signal Converter Frequency >>> Parallel

Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
3 control inputs (hold) for PNP signals [10 ... 30 VDC]
SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
Start-stop interface for absolute transducers and magnetostrictive sensors
Input frequency up to 1 MHz
25-bit parallel output push-pull in BCD, binary or Gray code format
Power supply 18 ... 30 VDC
Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)

Signal Distributor for Incremental Encoder without Potential Separation, 4 Outputs

GV224

Impulse Distributor for Incremental Encoder without Potential Separation, 4 Outputs

1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422 / HTL differential]
Input frequency up to 350 kHz [SE TTL / SE HTL] or 1 MHz [RS422 / HTL differential]
4 pulse outputs, formats corresponds to those of the input signals, but with individual assignment of the output level for each output
BUS interface for quick and easy expansion of the number of outputs
Power supply 10 ... 30 VDC
Signal delay time 430 ns
Input level at RS422 / TTL (differential voltage > 0.5 V),
Input level at HTL differential (differential voltage > 2 V),
Input level at HTL asymmetric LOW: 0 ... 5 V HIGH: 9 ... 30 V
Input level at TTL (asymmetrical): LOW: 0 ... 0.6 V HIGH: 2.2 ... 5 V
Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")

GV228

Impulse Distributor for Incremental Encoder without Potential Separation, 8 Outputs

1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
Input frequency up to 350 kHz [SE TTL / SE HTL] or 1 MHz [RS422 / HTL differential]
8 pulse outputs, formats corresponds to those of the input signals, but with individual assignment of the output level for each output
BUS interface for quick and easy expansion of the number of outputs
Power supply 10 ... 30 VDC
Signal delay time max. 430 ns
Input level at RS422 / TTL (differential voltage > 0.5 V),
Input level at HTL differential (differential voltage > 2 V),
Input level at HTL (asymmetric) LOW: 0 ... 5 V HIGH: 9 ... 30 V
Input level at TTL (asymmetrical): LOW: 0 ... 0.6 V HIGH: 2.2 ... 5 V
Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")

GT222

Impulse Distributor for Incremental Encoder with Potential Separation, 2 Outputs

1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
Input frequency up to 350 kHz [SE TTL / SE HTL] or 1 MHz [RS422 / HTL differential]
2 pulse outputs, formats corresponds to those of the input signals, but with individual assignment of the output level for each output
BUS interface for quick and easy expansion of the number of outputs
Power supply 10 ... 30 VDC
Signal delay time max. 430 ns
Input level at RS422 / TTL (differential voltage > 0.5 V),
Input level at HTL differential (differential voltage > 2 V),
Input level at HTL (asymmetric): LOW: 0 ... 5 V HIGH: 9 ... 30 V
Input level at TTL (asymmetrical): LOW: 0 ... 0.6 V HIGH: 2.2 ... 5 V
Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")

GT224

Impulse Distributor for Incremental Encoder with Potential Separation, 4 Outputs

1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422 / HTL differential]
Input frequency up to 350 kHz [SE TTL / SE HTL] or 1 MHz [RS422 / HTL differential]
4 pulse outputs, formats corresponds to those of the input signals, but with individual assignment of the output level for each output
BUS interface for quick and easy expansion of the number of outputs
Power supply 10 ... 30 VDC
Signal delay time max. 430 ns
Input level at RS422 / TTL (differential voltage > 0.5 V),
Input level at HTL differential (differential voltage > 2 V),
Input level at HTL (asymmetric) LOW: 0 ... 5 V HIGH: 9 ... 30 V
Input level at TTL (asymmetrical): LOW: 0 ... 0.6 V HIGH: 2.2 ... 5 V
Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
Dimensions W x H x D = 34 x 118 x 140 mm (1,34 x 4,65 x 5,51")

GT228

Impulse Distributor for Incremental Encoder with Potential Separation, 8 Outputs

1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
Input frequency up to 350 kHz [SE TTL / SE HTL] or 1 MHz [RS422 / HTL differential]
8 pulse outputs, formats corresponds to those of the input signals, but with individual assignment of the output level for each output
BUS interface for quick and easy expansion of the number of outputs
Power supply 10 ... 30 VDC
Signal delay time max. 430 ns
Input level at RS422 / TTL (differential voltage > 0.5 V),
Input level at HTL differential (differential voltage > 2 V),
Input level at HTL asymmetric LOW: 0 ... 5 V HIGH: 9 ... 30 V
Input level at TTL (asymmetrical): LOW: 0 ... 0.6 V HIGH: 2.2 ... 5 V
Compact housing for mounting on 35 mm top hat rail (according to EN 60715)
Dimensions W x H x D = 54 x 118 x 140 mm (2,13 x 4,65 x 5,51")

IO222

Signal Converter Incremental >>> IO-Link

1 incremental input (A, /A, B, /B)
for HTL/TTL/RS422 for NPN/PNP/NAMUR encoders and sensors
optionally 3 control inputs for PNP signals [10 ... 30 VDC]
IO link interface
Power supply 12 ... 30 VDC
Compact housing for mounting on 35 mm DIN rail
(according to EN 60715)

Product filter

Gateways

Converter

Divider & Multiplier

Splitter

Input format

Number of inputs

Number of outputs

Outputs

Interface

Supply voltage

Housing