GV460: Impulse Distributor for Incremental Encoder with Potential Separation, 8 Outputs

The GV4xx series is being discontinued on December 1st, 2023. For new projects we recommend the GV228 device from the new modular GV/GT-series.

Signal Splitters with 8 very compact and extremely versatile distributor with short-circuit protected encoder supply and 8 outputs. Suitable for the distribution of signals of incremental encoders or measuring systems. The outputs are cascadable to n x 8 outputs (no terminal loss). The input circuit of the outputs is potential separated, even the outputs are galvanically connected with each other and with the power supply. Due to the extended temperature range from -4° … +140° F (20° … 60° C), the devices are suitable for the use in harsh climatic conditions.
 

  • 1 pulse input with format A, B, Z [HTL]
    or A, /A, B, /B, Z, /Z [RS422]
  • Select input for PNP signals [10 ... 30 VDC]
  • Input frequency up to 200 kHz for HTL
    or 500 kHz for RS422 / TTL
  • 8 push-pull outputs
  • Power supply 10 ... 30 VDC
  • Extended temperature range -4° ... +140° F
    (-20° C ... +60° C)
  • Snap-on housing for top hat rail
    (according to EN 60715)
  • LEDs for indication of the Input pulses
  • Dimensions W x H x D = 72 x 144 x 61 mm (2.83 x 4.89 x 2.38'')
  • Consumption (without encoder supply) approx. 40 mA
  • Input level HTL asymmetrical (no inverted track) Low: < 4 V, High: > 10 V
  • Input level "Select"-Input Low: < 4 V, High: > 10 V
  • Kaskadier-input  A, B, Z, Pegel 5 V
    [CMOS, Low < 0,8 V, High > 3,5 V]
  • Signal delay 400 ns
  • Weight approx. 400 g
  • Storage -22° ... +167° F (-30° ... +75° C)
  • Conformity and standards: EMV 2004/108/EG:
    EN 61000-6-2, EN 61000-6-3

 

EC Declaration of Conformity

EC Declaration of Conformity

File type: pdf, File size: 160 KB

Manual series GV460, GV461, GV480, GV481

Manual series GV460, GV461, GV480, GV481

File type: pdf, File size: 523 KB

Data Sheet GV460-481

Data Sheet GV460-481

File type: pdf, File size: 204 KB

FK470: Ribbon cable

Sub-D-9 connectors (male) on both sides.


Show details »

« Back to overview