Pulse- / Frequency Multiplier
Products found: 2The frequency dividers and pulse multipliers from motrona are programmable control cabinet units for error-free division or pulse-spreading (proportional or reciprocal) multiplication of incremental measuring system resp. encoder signals in HTL or RS422 / TTL format. Easy mounting via snap-on housing for top hat rail (according to EN 60715).
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B, Z, /Z [RS422]
- 4 control inputs for PNP signals [10 ... 30 VDC]
- Input and output frequency up to 1 MHz
- Pulse output with format A, /A, B, /B, Z, /Z and
push-pull characteristic, [5 ... 30 VDC] - Power supply 11 ... 30 VDC
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys, RS232
- The device multiplies an incoming frequency by a proportional factor F1 and a reciprocal factor F2. The two factors F1 and F2 are adjustable in the range of 0.0005 to 9.9999
- All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous change of directions and vibrations
- Zero pulse generator: the frequency multiplier generates at the output an index signal with adjustable pulse interval, which can be synchronized as needed with the zero pulse at the input
- Pulse input with format A, B, Z [HTL single ended, TTL single ended] or
A, /A, B, /B, Z, /Z [RS422, HTL differential] - 4 control inputs for HTL, PNP signals [10 ... 30 VDC]
- Input and output frequency up to 1 MHz
- 3 incremental outputs with format A, /A, B, /B, Z, /Z, Push-Pull,
[8 … 29 VDC] - Power supply 9 ... 30 VDC
- Snap-on housing for top hat rail (acc. EN 60715)
- Multiplier / divisor adjustable as quotient F1 / F2
- Multiplication / division without cumulative residual errors
- Additional functions such as jog, trim, offset and reference