|
|
motrona control:
|
Electronic Timers and Industrial Stopwatches
|
|
|
|
ZX 122, ZX 123:
Preset Timer/Stopwatch with Relay Outputs
- Multi-purpose timer with dimensions 48x48 mm (1.89 x 1.89’’)
and operation modes as tachometer, counter or timer / stopwatch
- Two presets and two output relays
- ZX 122: 10 – 30 VDC power supply,
ZX 123: 90 – 250 VAC and aux. output 24 VDC for encoder supply,
otherwise both models are similar
- Bright LED display, 6 decades at 8 mm size (0.315’’)
- Programmable time resolution from milliseconds to hours
- Easy to set up by four front keys and menu support
- Add-on frame for 50x50 mm panel cut-out (1.969 x 1.969’’)ng
|
|
|
|
|
|
Series DX 342 - DX348:
Versatile Timers an Industrial Stopwatches with Outputs and Interfaces
The electronic timers shown in the table below are different with regard to their power supply and the outputs. All models however
provide the following common properties:
|
|
|
|
- Universal multi-function units with operation modes as timer, stopwatch, tachometer, baking time indicator and counter
- Adjustable time resolution between milliseconds and hours
- Selectable display modes (decimal format or clock format h : min : sec)
- Dimensions 96 x 48 mm (3.780 x 1.890’’) and
6 decade LED display at 15 mm (0.590’’) size
- Versatile Start - Stop - Latch - Reset functions
- Easy scaling and setup by means of 3 front keys and menu support
- Aux. output 24 VDC / 150 mA for supply of proximities and photocells
|
|
|
|
|
Timer
Type
|
New: DX 342
|
DX 345
|
DX 346
|
DX 347
|
DX 348
|
Power Supply 24 VDC
|
yes
|
yes
|
yes
|
yes
|
yes
|
Power Supply
115 / 230 VAC
|
---
|
yes
|
yes
|
yes
|
yes
|
Presets/Outputs
|
2 relay outputs
( C-NC-NO each)
|
---
|
---
|
2 transistor outputs
(optocouplers)
|
---
|
Analogue Output
|
---
|
---
|
+/- 10 V and
0/4 - 20 mA
|
---
|
---
|
Serial Interface
|
RS 232 / RS485
|
---
|
---
|
---
|
RS 232 / RS485
|
|
|
|
|
|
|
|
|
|
SX 340, SX 540, SX 640:
Universal Timer with Presets and optional
Analogue Output / Parallel or Serial Interface
- High performance, multi-function units with operation modes as timer/ stopwatch,
tachometer or baking time indicator
- Power supply 115/230 VAC or 18 – 30 VDC in one unit,
aux. output 12 VDC/150 mA for supply of sensors
- 3 models with different front dimensions: 96 x 48 mm, 96 x 72 mm
or 96 x 96 mm (3.78 x 1.89, 3.78 x 2.835, 3.78 x 3.78 ‘’)
- Bright LED display 6 decades at 15 mm size
- Universal inputs for sensors with PNP/ NPN or Namur characteristics,
with TTL or HTL level
- Easy setup and scaling by 4 front keys
- 3 programmable presets and outputs. Optional facilities for front thumbwheel switches or remote preset
- Minimum/maximum record memory, programmable key functions etc.
- Optional interfaces: analogue output, parallel output or RS232/ RS485 serial link
|
|
|
|
|
|
|
|
|
