English main page

_LOGO_shadow Startanimation2

Deutsche Hauptseite

Site principal français

            Modules for Automation and Motion Control

Home
Welcome to
 motrona
Products
Product range
and PDF brochures
About motrona
Company and contact persons
Agents
 motrona distributors worldwide
Download Section
Documents, software, firmware
Contact
Address details
and contact form

Direct Product Access
control:

Panel Meters, Indicators

Electronic Counters

Tachometers, Frequency Meters

Timers, Industrial Stopwatches

SSI Indicators, Parallel Displays

PROFIBUS / CANBUS indicators

Speed and Motion Monitors

motion:

Synchronization of Drives

“Flying” Saw and Shear Control

Rotating Cross Cutter Control

Rotary Eccentric Shear Control

Tubular Bag Machine Control

Winding and Traverse Control

Printing and Punching Control

interface:

Signal Converters Frequency >>>

Signal Converters Analogue >>>

Signal Converters SSI >>>

Signal Converters Incremental >>>

Level Converters TTL-RS422-HTL

Encoder Distributors and Splitters

Frequency Dividers and Multipliers

Interface for SinCos Encoders

 

Accessories for motrona units

motrona control:

SSI Indicators and Parallel Code Indicators / Displays (BCD-Bin-Gray)

 

     SSI Indicator Series IX 342 - IX 348
    The SSI indicators and displays shown in the table below are different with regard to power supply and outputs.
    All SSI displays provide the following common properties:

 

 

  • Bright LED display with 15 mm size (0.59’’)
  • SSI Master- and Slave operation with Baud rates up to 1 MHz
  • Easy to set up by three front keys and menu dialogue
  • Programmable scaling of the SSI display and free zero definition
  • Selectable Linearization functions
  • Programmable bit blanking, round-loop mode and more
  • Aux. 24 V output for supply of SSI encoders or other SSI sensors
  • Standard housing 96 x 48 x 150 mm (3.78 x 1.89 x 5.90 ‘’)

SSI indicator with interface

 

 

SSI Indicator Type

New: IX 342

>PDF<

IX 345

>PDF<

IX 346

>PDF<

IX 347

>PDF<

IX 348

>PDF<

Power Supply 24 VDC

yes

yes

yes

yes

yes

Power Supply
115 / 230 VAC

---

yes

yes

yes

yes

Presets/Outputs

2 relay outputs
( C-NC-NO each)

---

---

2 transistor outputs
(optocouplers)

---

Analogue Output

---

---

+/- 10 V and
0/4 - 20 mA

---

---

Serial Interface

RS 232 / RS485

---

---

---

RS 232 / RS485

 

      ______________________________________________________________________
     

 

    >PDF<

     IX340, IX540, IX640
    SSI Indicators with Customer-Combinable Outputs and Interfaces

  • SSI display unit with synchronous serial SSI input 6 - 27 bits, for applications with single-turn or multi-turn absolute encoders, Master or Slave operation
  • 3 models available
    IX 340 with dimensions 96 x 48 mm (3.78 x 1.89‘’)
    IX 540 with dimensions 96 x 72 mm (3.78 x 2.83’’)
    IX 640 with dimensions 96 x 96 mm (3.78 x 3.78’’)
  • Power supply 115/230 VAC or 18–30 VDC in one unit,
    aux. outputs 5 VDC/ 12 VDC/ 24 VDC for supply of SSI sensors and SSI encoders
  • Bright LED display 6 decades, 15 mm size (0.59’’)
  • Free definition of zero and full scale by front key setup
  • 3 programmable presets , either with fast transistor outputs or with relay outputs.
  • Optional facilities for front thumbwheel switches or remote preset
  • Latch function to freeze the display, minimum/maximum record memory, programmable key functions etc.
  • Optional interfaces: Analogue output, parallel output or RS232 / RS485 serial link

SSI display with analogue output

     ______________________________________________________________________
     

 

    >PDF<

     PX 340, PX540, PX640
    Parallel Code Displays (BCD, Bin, Gray) with Presets, Outputs and Interfaces

 

 

  • Parallel data input 20 bit, for display and control of signals with with parallel BCD or binary or Gray code format
  • 3 models available:
    PX 340 with dimensions 96 x 48 mm (3.78 x 1.89‘’)
    PX 540 with dimensions 96 x 72 mm
    (3.78 x 2.83’’)
    PX 640 with dimensions 96 x 96 mm
    (3.78 x 3.78’’)
  • Power supply 115/230 VAC or 18–30 VDC in one unit,
    Aux. outputs 5 VDC/ 12 VDC/ 24 VDC for supply of Parallel sensors and encoders with BCD or binary or Gray code
  • Bright LED display 6 decades, 15 mm size (0.59’’)
  • Free definition of zero and full scale by front key setup
  • 3 programmable presets , either with fast transistor outputs or with relay outputs.
  • Optional facilities for front thumbwheel switches or remote preset
  • Latch function to freeze the display, minimum/maximum record memory, programmable key functions etc.
  • Optional interfaces: Analogue output or RS232/ RS485 serial link

Rear view (front view see above)
Parallel display BCD - binary - Gray

 

 

 

 

Legal Notice

motrona GmbH, Zwischen den Wegen 32, 78239 Rielasingen (Germany)  Tel. +49 7731 9332-0  Fax +49 7731 9332-30  Email :info@motrona.com