control - motion - interface

Home Welcome to motrona About motrona Company and Contact Persons International Distributors Worldwide Support Brochures-Documents-Software Contact How to contact motrona

control Panel Meters, Indicators Electronic Counters Tachometers, Frequency Meters Timers, Industrial Stopwatches SSI Indicators, Parallel Displays PROFIBUS / CANBUS Indicators Speed and Motion Monitors

motion Synchronization of Drives “Flying” Saw and Shear Control Rotating Cross Cutter Control Rotary Eccentric Shear Control Tubular Bag Machine Control Winding and Traverse Control Printing and Punching Control

interface Signal Converters Frequency >> Signal Converters Analogue >> Signal Converters SSI and Parallel >> Signal Converters Incremental >> Level Converters TTL-RS422-HTL Encoder Distributors, Splitters Frequency Dividers, Multipliers Interface for SinCos Encoders Combinations with Converters Accessories

Signal Converter Incremental Count to Analogue and to Serial and incremental >>> optical >>> incremental * = instant stock availability ZU 252*: Signal Converter from incremental quadrature count to analogue (voltage, current) and to serial RS232 / RS485  [PDF manual] This unit is suitable to convert angular and positional information from a quadrature encoder to analogue and serial format Signal converter for use with all incremental encoders, proximitiy switches etc. either with TTL/RS422 output or with HTL (10-30V) output Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional to the encoder position RS 232 and RS 485 serial interface for readout of the actual encoder position Easy to set up by simple TEACH procedure, or by PC (operator software: see SUPPORT) Free scaling, programmable linearization curves etc. Power units for 115/230 VAC supply: see accessories   Please note that also some of our Display Counters are suitable for conversion of incremental counts to analogue and to serial (see “Electronic Counters”) ______________________________________________________________________     LW 215/216*: Innovative optical fiber modules for a robust transmission of incremental encoder or sensor signals [PDF manual] The optical fibre modules LW215 and LW216 are forming together a transmission system for data transmission of incremental signals of encoders or sensors by means of optical fibres. Safe and reliably transmission of signals, up to a distance of 1000m The optical fibre cable can be routed through explosive areas as well Resistant against extremely strong electromagnetic fields   For use with all incremental encoders and sensors either with TTL/RS422 output or with HTL (10-30V) output Four channels allow the transmission of signals with a maximum data rate of 800 kBit/s Maximum clock frequency 400 kHz / channel   Power supply either 5 VDC or 10-30 VDC Compact DIN rail mounting Glass fibre cables are available ready assembled   more optical fiber modules for SSI encoder or sensor signals (see LW217/218)

________________________________________________________________________________________________________________________________________________________________
[Legal Notice]             [webmaster@motrona.com]            © 2012 motrona GmbH, Zwischen den Wegen 32, 78239 Rielasingen (Germany)        February, 2012