Site principal français English main page Deutsche Hauptseite 

 

motrona: control-motion-interface       
     control  -  motion  -  interface


 

Home
Welcome to motrona

About motrona
Company and Contact Persons

International
Distributors Worldwide

Support
Brochures-Documents-Software

Contact
How to contact motrona

control

Panel Meters, Indicators

Electronic Counters

Tachometers, Frequency Meters

Timers, Industrial Stopwatches

SSI Indicators, Parallel Displays

PROFIBUS / CANBUS Indicators

Speed and Motion Monitors

motion

Synchronization of Drives

“Flying” Saw and Shear Control

Rotating Cross Cutter Control

Rotary Eccentric Shear Control

Tubular Bag Machine Control

Winding and Traverse Control

Printing and Punching Control

interface

Signal Converters Frequency >>

Signal Converters Analogue >>

Signal Converters SSI and Parallel >>

Signal Converters Incremental >>

Level Converters TTL-RS422-HTL

Encoder Distributors,  Splitters

Frequency Dividers, Multipliers

Interface for SinCos Encoders

Combinations with Converters

Accessories

Indicators / Displays and Data Preset Units for PROFIBUS and CANBUS

* = instant stock availability

    The units shown below have been designed for simple remote indication and for easy parameter setting of process values with  PROFIBUS or CANBUS networks

     

    PB 306  : PROFIBUS Data Preset Unit
    CA 306*: CANBUS Data Preset Unit

  • PB 306 and CA 306 are simple preset units with front thumbwheel switches, for easy remote setting of single parameters (i.e. setspeed of a drive) via fieldbus.
  • By pressing the ENTER button, the actual BCD setting will be transmitted to the selected register of the target unit as PDO or SDO (CANBUS) or hold in the polling register for readout (PROFIBUS)
  • Standard housing 96 x 48 x 150 mm (3.78 x 1.89 x 5.90 ‘’)

CANBUS and PROFIBUS Preset Unit

     ______________________________________________________________________

    PB 340*: PROFIBUS Indicator (Display only)
    CA 340  : CANBUS Indicator (Display only)

  • PB 340 and CA 340 are simple indicator units for remote display of all actual data which are available on the network.
  • The use of this display can provide remote operator information about any of the actual process or parameter settings, at any place around the machine.
  • The CAN version is able to handle PDO objects as well as SDO objects.
  • Standard housing 96 x 48 x 150 mm (3.78 x 1.89 x 5.90 ‘’)

CANBUS Indicator, PROFIBUS Display

     ______________________________________________________________________

    PB 541: PROFIBUS Combination (Indicator, Preset)
    CA 541: CANBUS Combination (Indicator, Preset)

  • PB 541 and CA 541 combine both, preset switch and indicator. Whilst the BCD switch allows to make register changes via PROFIBUS or CANBUS, the LED display provides information about the actual setting of the same or any other register value.
  • Standard housing 96 x 72 x 150 mm (3.78 x 2.835 x 5.90 ‘’)
  • All units provide DIL switches on the rear side for settings of operational and communication parameters.

    GSD Files (PROFIBUS) and EDS Files (CANBUS) are available for download
    under [Support]

CANBUS and PROFIBUS Indicator with Presets

 

 

 

 

________________________________________________________________________________________________________________________________________________________________
[Legal Notice]                          [webmaster@motrona.com]                       © 2016 motrona GmbH, Zeppelinstr. 16, 78244 Gottmadingen (Germany)               January, 2016