motrona interface:
|
|
Impulse Distributors, Encoder Splitters and Signal Switchers for Incremental Encoders, Linear Scales and SSI Encoders
|
|
|
Encoder splitters and impulse distributors are used for proper and trouble-free interconnection between incremental encoders or
measuring systems and several target devices. Encoder switchers are used for signal switch-over from several incremental encoders to one or more target devices.
Some of the units shown below allow at the same time also conversion of the signal level or potential separation
|
|
|
|
|
|
GV150
|
GV151
|
GV202
|
GV203
|
GV210
|
GV470
|
Function:
|
Encoder Distributor
|
Encoder Distributor
|
Encoder Splitter
|
Encoder Splitter
|
Encoder Splitter and Switcher
|
Distributor and Switcher
|
Number of Input Channels:
|
1 A, /A, B, /B, Z, /Z
|
1 A, /A, B, /B, Z, /Z
|
1 A, /A, B, /B, Z, /Z
|
1 A, /A, B, /B, Z, /Z
|
2 A, /A, B, /B, Z, /Z
|
1 + 1 A, /A, B, /B, Z, /Z
|
Input Level:
|
TTL / RS422
|
TTL / RS422 (HTL optional)
|
TTL / RS422
|
HTL
|
TTL / RS422 or HTL (selectable)
|
TTL / RS422 or HTL (selectable)
|
Number of Output Channels
|
6 A, /A, B, /B, Z, /Z
|
6 A, /A, B, /B, Z, /Z
|
2 A, /A, B, /B, Z, /Z
|
2 A, /A, B, /B, Z, /Z
|
2 A, /A, B, /B, Z, /Z
|
8 + 1 A, /A, B, /B, Z, /Z
|
Output Level:
|
TTL/RS422
|
TTL/ RS422 or HTL, individually selectable
|
TTL/ RS422 or HTL, individually selectable
|
TTL/ RS422 or HTL, individually selectable
|
TTL/ RS422 or HTL, individually selectable
|
Every output individually from 5 to 30 volts
|
Potential Separation:
|
yes
|
yes
|
no
|
no
|
no
|
yes
|
Picture:
|
|
|
|

|
|
|
|
|
|
|
|
|
|
|
|
|
GI 210: Changeover Switch between two SSI Encoders and one SSI Master
|
|
|
|
- Contactless and bounce-free commutation of all signals via remonte 24 volts control signal
- Automatic sychronisation of the changover point to next SSI transmission pause
- Cascadable for more SSI encoders
- All connections via screw terminal strips
- Slim and space-saving housing for DIN rail mounting

|
|
|
|
|
|
|
|
|
|
GV 155, GV 156: Cross Switchers for Encoder Signals and Analogue Signals
|
|
|
|
- Contactless cross switchers for bounce-free commutation between two encoder inputs and
two encoder outputs as well as two analogue inputs and outputs (cascadable)
- Two impulse input channels, each with encoder channels A, /A, B, /B, Z, /Z with TTL level
(HTL level optional)
- Two impulse outputs with exactly the same impulse format.
GV 155 uses TTL / RS422 outputs only GV 156 provides selectable RS422 / HTL output levels
- Two analogue inputs and two analogue outputs for +/- 10 V signals
- Digital control inputs (PLC compatible 18-30 V) for assignment of signal ways between
inputs 1/ 2 and outputs 1/ 2
- Input frequency max. 300 kHz (impulse channels)
- Power supply 18-30 VDC
- Closed 19‘‘ steel cassette for rack mounting (option SM150 for DIN rail mounting)
|
|
|
|
|
|
|
|
|
|
|
|